Differences

This shows you the differences between two versions of the page.

--- blog:20250908 [2025/09/09 03:23] – Vincent Palacios
+++ blog:20250908 [2025/09/09 05:45] (current) – Vincent Palacios
@@ Line 40: / Line 40: @@
 | 20250908T0303 |Alpha Lac|g |  12s| 50 | 1.143| 3.76| 22.32 | 50.23 |Low-Pol | Main | Purpose | tracking? Others?|
 | 20250908T0322 |Phi Cas  |g |  12s| 50 | 1.058| 4.96| 1.20  | 58.13 |High-Pol| Main | Purpose | tracking? Others?|
+| 20250908T0343 |Beta cep |g |  12s| 50 | 1.410| 3.23| 21.28 | 70.33 |Target  | Main | Purpose | tracking? Others?|
+| 20250908T0400 |Beta cep |g |  12s| 50 | 1.444| 3.23| 21.28 | 70.33 |Target  | Main | Purpose | tracking? Others?|
+| 20250908T0418 |Alpha Lac|g |  12s| 50 | 1.321| 3.76| 22.32 | 50.23 |Low-Pol | Main | Purpose | tracking? Others?|
+| 20250908T0435 |Phi Cas  |g |  12s| 50 | 1.083| 4.96| 1.20  | 58.13 |High-Pol| Main | Purpose | tracking? Others?| sharpcap crashed when finishing sequence had to restart nuc since sharpcap wouldnt close, deleted due to sharpcap crashing partway through
+| 20250908T0515 |Phi Cas  |g |  12s| 50 | 1.120| 4.96| 1.20  | 58.13 |High-Pol| Main | Purpose | tracking? Others?|
@@ Line 86: / Line 96: @@
 -slewed to Alpha Lac and started capturing Alpha Lac
+- sharpcap crashed when finishing sequence of phi cas, sharpcap wouldnt close and was preventing setting second sharpcap to rev03 saving location, restarting nuc to fix
+- nuc seems to be stuck on the restarting screen going to unplug power cable and plug back in
+- nuc is back up and running
+- deleted frames from when sharpcap crashed
+- while redoing frames for phi cas started dropping lots of frames before sharpcap stopped responding again, by the time we restart  the nuc and set up the sharpcap settings again we will have to close up
+- closing up
+- fully shut down
@@ Line 110: / Line 136: @@
 :00 - Temp:50F, Hum:96
+:00 - Temp:49F, Hum:100
 =====Data=====