Differences

This shows you the differences between two versions of the page.

--- blog:20251027 [2025/10/28 03:22] – Sterling Olson
+++ blog:20251027 [2025/10/28 05:20] (current) – Sterling Olson
@@ Line 2: / Line 2: @@
 =====Time=====
+- 0530
 =====Attendance=====
 Bhanu, Saisri, Jason, Nick, Pavi
@@ Line 42: / Line 42: @@
 |  20251027T0302 | Phi Cas  | g  |  12ms | 50 | 1.214 | 4.95 | 01 21 | 58.21  | High-Pol | Scope | Purpose | tracking? Others?|
 |  20251027T0321 | Beta Tau  | g  |  12ms | 50 | 1.031 | 1.65 | 05 26 | 28.36  | Low-Pol | Scope | Purpose | tracking? Others?|
+|  20251027T0341 | Epsilon Cas  | g  |  12ms | 50 | 1.245 | 3.35 | 01 56 | 63.47  | Target  | Scope | Purpose | tracking? Others?|
+|  20251027T0402 | Phi Cas  | g  |  12ms | 50 | 1.353 | 4.95 | 01 21 | 58.21  | High-Pol | Scope | Purpose | tracking? Others?|
+|  20251027T0421 | Beta Tau  | g  |  12ms | 50 | 1.019 | 1.65 | 05 26 | 28.36  | Low-Pol | Scope | Purpose | tracking? Others?|
+|  20251027T0500 | Epsilon Cas  | g  |  12ms | 50 | 1.420 | 3.35 | 01 56 | 63.47  | Target  | Scope | Purpose | tracking? Others?|
@@ Line 80: / Line 84: @@
 | 0320 | Slewed to Beta Tau |
 | 0321 | Started Captures of Beta Tau |
+| 0338 | Finished Captures of Beta Tau |
+| 0340 | Slewed to Epsilon Cas |
+| 0341 | Started Captures of Epsilon Cas |
+| 0358 | Finished Captures of Epsilon Cas |
+| 0400 | Slewed to Phi Cas |
+| 0402 | Started Captures of Phi Cas |
+| 0418 | Finished Captures of Phi Cas |
+| 0420 | Slewed to Beta Tau |
+| 0421 | Started Captures of  Beta Tau |
+| 0437 | Finished Captures of  Beta Tau |
+| 0458 | Slewed to Epsilon Cas |
+| 0500 | Started Captures of Epsilon Cas |
+| 0517 | Finished Captures of Epsilon Cas |
 =====ToDo=====
@@ Line 87: / Line 103: @@
 =====Notes=====
-Please Retake LED Calibrations and delete the previous one.
+*Please Retake LED Calibrations and delete the previous one.
+*When trying to redo LED Calibrations during GS, we ran into the following error when trying to upload the Arudino script: "avrdude: ser_open(): can't open device "\\. \COM2": Access is denied." Unsure if the earlier shifts were experiencing a similar issue, but we tried a few possible solutions such as restarting the IDE and checking that the serial monitor tabs weren't open (from Arudino forums) with no success. Therefore LED calibrations could not be redone.
+*Sporadic cloud coverage throughout GS. Some captures have clouds covering target in the middle of a capture.
+*Running low on disk space at around 0430
 =====Weather=====
@@ Line 103: / Line 123: @@
 | 0200 | 40 | 82 |
 | 0300 | 39 | 82 |
+| 0400 | 39 | 79 |
+| 0500 | 39 | 82 |
 =====Data=====