wiki:facility:usage:how_to_use:tracking_autoguiding:set_tracking_rate

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
wiki:facility:usage:how_to_use:tracking_autoguiding:set_tracking_rate [2024/01/11 19:53] – Roy Proutywiki:facility:usage:how_to_use:tracking_autoguiding:set_tracking_rate [Unknown date] (current) – removed - external edit (Unknown date) 127.0.0.1
Line 1: Line 1:
-====== Setting Tracking Rate ====== 
- 
-This is the procedure to set the tracking rate on DFMTCS 
- 
-===== Control Computer ===== 
- 
-  - Open DFM TCS Software 
-  - Go to "Telescope" on top bar 
-  - Select "Rates" 
-  - Set RA tracking rate to 15.042 arcsec/sec 
-  - Click Apply 
-  - Verify tracking rate on the center status panel "Rates" that 15.042 arcsec/sec had been successfully applied 
- 
-===== Tracking Rates ===== 
- 
-For most situations, setting the tracking rate to 15.011 arcsec/sec is recommended. This is the sidereal tracking rate with empirical modifications a la Onkar and Connor.  
- 
-Ignore this stuff ... Onkar and Roy don't remember writing this. GABRIEL!? 
-When setting [[wiki:tracking_autoguiding:autoguiding|]] speed, DFMTCS has a bug that results in 15.042 arcsec/sec not being sidereal. When using the [[wiki:tracking_autoguiding:autoguiding|]] port or [[wiki:handpaddles:handpaddle|]] port, sidereal speed is ~11 arcsec/sec. This only means that the telescope is moving faster than it is supposed to when setting those rates, and might prove useful when [[wiki:tracking_autoguiding:autoguiding|]]. 
-