======20240903==========

=====Time===== 
1900-2305
=====Attendance=====
Connor, Dimitry, John, Isaiah, later Roy

=====Spaces Occupied=====
PHYS 401, 433c
=====Goals=====
Look at Stars
=====Equipment Used=====
^ Scope ^ Camera ^
|Main|ASI 432|
|Finder|ASI 178|

=====Frame Table=====

^ Time Observed ^ Source Name ^ Filter ^ Int Time [s] ^ Gain ^ Airmass ^ Mag (filter) ^ RA [h] ^ DEC [deg] ^ Source Type ^Scope ^ Purpose ^ Notes^
|  YYYYMMDDThhmm | (HD/NGC/ETC)   | UBVRI  | e.g., 3 |150|1.0 | 1.25(V) | 20 | 45  | Star  | Main | Pointing |15.042 w/o ag|

=====Log=====
  * John, Dimitry, & Isaiah does start up procedures.
  * Connor arrives.
  * Installed camera onto on-axis.
  * Observed that telescope slews only north and south but not east and west.
  * 2000 - Connor checks to see if there are any obstructions.
  * 2001 - No obstructions found.
  * 2003 - Connor says, "This is not good."
  * 2014 - Connor filps "External Computer" on Motor Driver Chasis, telescope starts working right???
  * 2016 - Went back upstairs to finish camera installation.
  * 2018 - Cords for camera missing, Connor left to get them.
  * 2021 - John installs cords on camera.
  * 2023 - Dimitry slews to Vega.
  * 2027 - John connects camera to SharpCap.
  * 2028 - Connor and Isaiah go upstairs.
  * 2030 - " " Manually slew telescope.
  * 2035 - Uploaded photo to Astrometry.net.
  * 2039 - Calibrated telescope with results from astrometry.net.
  * 2040 - Slewed back to Vega.
  * 2045 - Finished final calibration, blew up Vega.
  * 2047 - Slewed to HD 174260 to observe FWHM Measurment.
  * 2100 - Slewed to c12.
  * 2110 - Saw nothing.
  * 2113 - Slewed to Pegasus Cluster.
  * 2119 - Failed to slew.
  * 2120 - Tried to slew to Vega but east and west axis is not moving again....
  * 2149 - Slewing to zenith to reset, will take a LONG time...
  * 2200 - Roy arrived
  * 2206 - Had to shut everything down
  * 2212 - UPS not turning on
  * 2216 - Unplugged UPS completely as well as other stuff
  * 2219 - Plugged everything back in
  * 2224 - Turned everything back on
  * 2226 - East and west movement still not working
  * 2230 - Going upstairs to take stuff apart
  * 2230-2300 - Removed gear box casing to investigate for the RA motor. When slewing east and west, noticed some twitching of the motor
  * 2305 - Started shutdown procedures
=====ToDo=====

=====Notes=====


=====Weather=====

=====Data=====

{{tag>[seeing tracking picsarr mag]}}