This is an old revision of the document!
Reattach ASI 432 with necessary adapters/instrumentation
Collect flat field frames in UBVRI, emphasis on BV if time constrained
Run smart histogram tool on four fields in each filter provided by Eileen to find recommended settings
Capture a few dozen light frames of these fields in each filter at recommended settings
Time Observed | Source Name | Filter | Int Time [s] | Gain | Mag (filter) | RA [h] | DEC [deg] | Source Type | Scope | Purpose | Notes |
20231105T1845 | Deneb | U | 0.841s | | 1.25(V) | 20.75 | 45 | None Saved | Main | Pointing | Focused at 2155.4 |
20231105T1903 | NGC 7790 | U | 25x 11.7s | 150 | 13(V) | 24 | 61 | Field | Main | Magnitude | SmartHist Settings/1.140 AM |
20231105T1910 | NGC 7790 | V | 25x 5s | 150 | 13(V) | 24 | 61 | Field | Main | Magnitude | SmartHist Settings/1.140 AM |
20231105T1915 | NGC 7790 | B | 25x 5s | 150 | 13(V) | 24 | 61 | Field | Main | Magnitude | SmartHist Settings/1.140 AM |
20231105T1919 | NGC 7790 | R | 25x 5s | 150 | 13(V) | 24 | 61 | Field | Main | Magnitude | SmartHist Settings/1.126 AM |
20231105T1925 | NGC 7790 | I | 25x 5.6s | 150 | 13(V) | 24 | 61 | Field | Main | Magnitude | SmartHist Settings/1.121E AM |
20231105T1950 | SA20 | U | 25x 14.7s | 150 | 13(V) | 1 | 45 | Field | Main | Magnitude | SmartHist Settings/1.090 AM |
20231105T | SA20 | V | 25x 5s | 150 | 13(V) | 1 | 45 | Field | Main | Magnitude | SmartHist Settings/1. AM |
20231105T | SA20 | B | 25x 5s | 150 | 13(V) | 1 | 45 | Field | Main | Magnitude | SmartHist Settings/1. AM |
20231105T | SA20 | R | 25x 5s | 150 | 13(V) | 1 | 45 | Field | Main | Magnitude | SmartHist Settings/1. AM |
20231105T | SA20 | I | 25x 6.27s | 150 | 13(V) | 1 | 45 | Field | Main | Magnitude | SmartHist Settings/1.059 AM |
20231105T2016 | PG2213 | U | 25x 14s | 150 | 13(V) | 22 | 0 | Field | Main | Magnitude | SmartHist Settings/1.331 AM |
20231105T | SA20 | V | 25x 5s | 150 | 13(V) | 1 | 45 | Field | Main | Magnitude | SmartHist Settings/1.345 AM |
20231105T | SA20 | B | 25x 5s | 150 | 13(V) | 1 | 45 | Field | Main | Magnitude | SmartHist Settings/1. AM |
20231105T | SA20 | R | 25x 5s | 150 | 13(V) | 1 | 45 | Field | Main | Magnitude | SmartHist Settings/1. AM |
20231105T | SA20 | I | 25x 5s | 150 | 13(V) | 1 | 45 | Field | Main | Magnitude | SmartHist Settings/1.059 AM |
20231105T | FLATS | U | 20x 11.7 | 150 | – | – | FLAT | Main | Calibration | Dome |
20231105T | FLATS | U | 20x 14 | 150 | – | – | FLAT | Main | Calibration | Dome |
20231105T | FLATS | U | 20x 14.7 | 150 | – | – | FLAT | Main | Calibration | Dome |
20231105T | FLATS | V | 20x 5 | 150 | – | – | FLAT | Main | Calibration | Dome |
20231105T | FLATS | B | 20x 5 | 150 | – | – | FLAT | Main | Calibration | Dome |
20231105T | FLATS | R | 20x 5 | 150 | – | – | FLAT | Main | Calibration | Dome |
20231105T | FLATS | I | 20x 5 | 150 | – | – | FLAT | Main | Calibration | Dome |
20231105T | FLATS | I | 20x 6.3 | 150 | – | – | FLAT | Main | Calibration | Dome |
20231105T | FLATS | I | 20x 5.6 | 150 | – | – | FLAT | Main | Calibration | Dome |
20231105T | DARK | – | | 150 | – | – | DARK | Main | Calibration | Box |
20231105T | DARK | – | | 150 | – | – | DARK | Main | Calibration | Box |
20231105T | DARK | – | | 150 | – | – | DARK | Main | Calibration | Box |
20231105T | DARK | – | | 150 | – | – | DARK | Main | Calibration | Box |
20231105T | DARK | – | | 150 | – | – | DARK | Main | Calibration | Box |
20231105T | DARK | – | | 150 | – | – | DARK | Main | Calibration | Box |
20231105T | BIAS | – | | 150 | – | – | DARK | Main | Calibration | Box |
20231105T | BIAS | – | | 150 | – | – | DARK | Main | Calibration | Box |
20231105T | BIAS | – | | 150 | – | – | DARK | Main | Calibration | Box |
20231105T | BIAS | – | | 150 | – | – | DARK | Main | Calibration | Box |
20231105T | BIAS | – | | 150 | – | – | DARK | Main | Calibration | Box |
20231105T | BIAS | – | | 150 | – | – | DARK | Main | Calibration | Box |
There is some issue with slewing to Zenith
What TS6 and DFMTCS report as Zenith is not 'straight-up'
Roy removed from GAM-lite bottom plate ThorLabs LCP01 plate via 4x screws with 5/32 allen key
Roy re-attached ThorLabs instrument rotator with 4x screws with 3/16 allen key
USB cable into remote Icron
Serial cable to ThorLabs controller
Opened Kinesis and attempted to connect – failed
Needed to power cycle through Power Controller (outlet 5)
Roy dusted (with compressed air) the filter wheel and reattached ASI 432 CMOS to filter wheel
Confirmed UBVRI ordering
Roy attached filter wheel/432 assembly to on-axis
Olivia and Roy decided to wait to the end of the night to collect calibration frames
Pointed at Deneb
Using Kinesis, aligned 432 to North-up at $230^\circ$ (set speed to $5^\circ/s$)
Moved to NGC 7790
No issues with mirror doors
“I am well aware of the weirdness of brains” -OliviaC
Ambient 20.2C
SkyTemp -14.3C
Humidity 33%
Dome Temp 19C