20250905

1830 -

Krishna, Dylan

401, 433C, Dome

Astropol

Scope	Camera	Focus
Main	PICSARR w/ 178
Finder	ASI 482	2465

Time Observed	Source Name	Filter	Int Time [s]	Gain	Airmass	Mag (filter)	RA [h]	DEC [deg]	Source Type	Scope	Purpose	Notes
YYYYmmddTHHMM	Object	Filter	time	gain	airmass	mag(V)	HH	DD	type	Scope	Purpose	tracking? Others?
20250905T1930	Darks	u	12s	0	1.0	mag(V)	HH	DD	Cal	Scope	Purpose	tracking? Others?
20250905T2016	LED	g	12s	50	1.0	mag(V)	HH	DD	Cal	Scope	Purpose	tracking? Others?
20250905T2159	Beta Cep	g	12s	50	1.221	3.2	21.27	70.42	Target	Main	Purpose	tracking is stable, cloud cover 18%
20250905T2226	HD 154445	g	12s	50	1.946	5.6	17.05	-00.53	High Pol	Main	Purpose	tracking is stable, cloud cover 11%
20250905T2246	Alpha Lac	g	12s	50	1.087	3.77	22.31	50.26	Low Pol	Main	Purpose	tracking is stable, cloud cover 4%
20250905T2307	Beta Cep	g	12s	50	1.175	3.2	21.27	70.42	Target	Main	Purpose	tracking is stable, cloud cover 12%
20250905T2326	Beta Cep	g	12s	50	1.175	3.2	21.27	70.42	Target	Main	Purpose	tracking is stable, cloud cover 12%

1910 Installed the PICSARR Camera to the telescope
1930 Took Darks
2028 While trying to take LED calibration the Arduino is give this error “No space left on device”, once tried to install updates, then it worked we have changed the LED 6 and took LED, after that when we tried changing the LED level to 3, it is again giving us this error.
2115 The Arduino issue got solved, we have deleted the temp files in the local disk, it was the reason for the error
2125 Done Pointing the telescope
2130 The initial focus is 2623, the star is out of focus, so changed it to 2580
2140 Took beta cep capture but it is saving in the desktop, later changed the saving location to Z:\PICSARR\REV03. So we had to take beta cep capture again
2159 Started Capturing Beta cep
2226 Started capturing HD 154445
2246 Started capturing ALpha Lac
2307 Started capturing Beta cep

21:00 - Temp:76F, Hum:82 | 23:10 - Temp:73F, Hum:97

Time