train:blog_example

Blog Example

1800-0600

ES: Braydn and Percy GS: Sam and Tara

PHYS 401, 433C

1. Misc Request:Take set of 10 frames in V of m35
2. Misc Request:Continually take sets of 10 frames in v filter of ad Leo with 30 seconds between each set until need to start prepping for exoplanet observing plan
3. Exoplanet Observing Plan: By 23:00 start taking continual sets of 2 frames in V staggered by 60s of Hat-P-12 until 02:00

Scope Camera Focus
MainASI 26002069.7
FinderASI 432n/a
Time Observed Source Name Filter Int Time [s] Gain Airmass Mag RA [h] DEC [deg] Source Type Scope Purpose Notes
YYYYmmddTHHMM Object Filter time gain airmass mag HH DD type Scope Purpose tracking? Others?
20250424T1855 flats V .025 150 1.002 n/a n/a n/a flat main flats sky flats
20250424T2104 M35 V 1 150 1.031 9 6.09 24 open cluster Scope Purpose took 10 frames
20250424T2130 Ad Leo V 1 150 1.046 10.19 10 19. star main Purpose took 10 frames 232 times staggered by 30s
20250424T2311 Hat-P-12 b V 10 150 1.059 12.8 13 43 star w/ exoplanet Scope Purpose took 2 frames 203 times staggered by 60s until end of planetary transit
20250425T0201 Darks V 10 150 1 n/a n/a n/a type main Darks tracking? Others?
20250425T0201 Darks V 0.025 150 1 n/a n/a n/a type main Darks tracking? Others?
  • 1800 - Switched astropol camera off main telescope and replaced with 2600
  • 1820 - prepped dome and closed hatch
  • 1830 - connected ascom, dfmtcs and sky6
  • 1840 opened mirror doors
  • 1845 - set tracking rate
  • 1900 - took sky flats
  • 1930 - did pointing calibration using arcturus
  • 2000 - slewed to m35
  • 2010 - autodome did not follow telescope
  • 2020 - fixed autodome by manually moving dome so telescope pointed out of it, then setting dome position to telescope azimuth in DFMTCS
  • 2035 - took captures of M35
  • 2100 - slewed to AD Leo
  • 2115 - ASI 2600 disconnected
  • 2125 - reseated data cable from 2600 to ICRON box on ICRON box
  • 2145 - took captures of AD Leo
  • 2230 - slewed to Hat-P-12
  • 2235 - took captures of Hat-P-12
  • 2310 - slewed to zenith
  • 2325 - closed mirror doors
  • 2335 - south mirror door took a long time to close
  • 0000 - took darks
  • 0050 - shutdown

1900: 56F, H 80%
2100: 54F, H 78%
2300: 55F, H 79%
0100: 58F, H 82%

  1. 2600 camera disconnected randomly when about to take captures once, fixed be reseating data cable from 2600 to ICRON box on the ICRON Box
  2. South mirror door was slow to close